• Full power at low spindle speed
• Large diameter precision ball screws and nut assemblies on X and Z axis-with metal covers
• T-slotted compound for easy mounting of optional tool posts
• May be used as a conventional (manual ) lathe utilizing dual handwheels or as a full feature two axis CNC
• Centralized automatic slideway lubrication system
• Coolant system
• Easy chip removal through a front access chip pan on wheels
• Full sheet metal enclosure to keep coolant and chips off the floor
• 15" is the swing over the bed
• Distance between centers is 39.3" or 59"
• Spindle speed - 50~4,500 rpm
• 10 HP main spindle motor

• Rigid single-piece bed casting featuring two vee and two flat ways, all hardened and ground.
• Precision high speed spindle mounted on two taper bearings in front and a high speed bearing in the rear for support.
• Constant surface speed headstock control providing infinite speeds to 2500 rpm.
• All gears and shafts are hardened and ground. Large diameter precision ball screw and nut assemblies on X and Z axis, with metal covers.
• T-slotted compound for easy mounting of optional tool posts.
• Model 16 CNC 2 axis lathe may be used as a conventional (manual) lathe utilizing dual handwheels or as a full two axis CNC.
• Full sheet metal enclosure to keep coolant and chips off the floor.
• Standard removable steady rest and follower.

• One-piece cast base structure for maximum stiffness and vibration dampening
• Induction hardened and precision ground guide ways
• Precision high speed spindle mounted on two taper bearings in front and a high speed bearing in the rear for support
• Constant surface speed providing infinite speeds to 2,000 rpm
• Two spindle gear ranges with automatic shift
• All gears and shafts are hardened and ground
• Large diameter precision ball screw and nut assemblies on X and Z axis-with metal covers
• T-slotted compound for easy mounting of optional tool posts
• 15HP vector spindle motor
• AC brushless axis motor
• Large spindle bore 3.15" standard (optional larger bore 4")
• Full power at low spindle speed
• May be used as a conventional (manual) lathe utilizing dual handwheels or as a full feature two axis CNC
• Centralized automatic slideway lubrication system
• Coolant system
• Easy chip removal through a front access chip pan on wheels
• Full sheet metal enclosure to keep coolant and chips off the floor

• DynaPath Delta 2000 T PC Based CNC Control with Standard Features
• 12 inch Color LCD with Interpolated Graphics
• 3.5" Floppy Disk Drive for Part Program Storage
• Hard Disk Drive for Downloading Large Files
• Menu Driven Conversational & EIA "G" Code Programming
• Interactive Conversational Programming Graphics
• Auxiliary Operators Panel

• Reference and Overtravel Limit Switches
• Automatic Lubrication System
• Precision Ground Ballscrews
• AC Brushless Servo Axis Motors
• Flood Coolant with Operation Controlled by M Function
• Fully Enclosed Splash Guard
• Removable Chip Pan
• Work Light
• Hardened and Ground Slideways
• Dual Electronic Handwheels
• Joystick for Jogging Axis

• 3 Jaw Chuck (Strong Brand)
• Geared Head with Programmable Spindle Speeds
• Constant Surface Speed

• Tailstock with Center
• T-slotted Compound for Optional Tool Post
• Tool Kit
• Leveling Pads
• Operation Manual

• DynaPath Delta 2000 CNC Control with full 2-axis contouring capability for lathe operations.
• Conversational programming with "fill in the blanks" style data entry
• Download "G" Code (EIA) files from CAD/CAM systems

The FB16's complete automatic lube oil system is electrically powered to deliver oil to the ways, ball screws and other critical items. Oil delivery amount and timing can be adjusted based on working conditions. System has audible low oil level indicator.

Full enclosure with sliding doors gives full access to any portion of the work area. Operator controls, both manual pulse generators and CNC DynaPath control are mounted on sliding door for ease of adjustment. Gear box control with three speed ranges is on the right side for fast changes. Note electrical interlock on door is standard.

• Bed width is 13" for maximum tool and work support
• All machine ways are hardened and ground for long, accurate life
• All way surfaces are oil lubricated with an automatic lube oil system

The base, cross slide and saddle are certified MeehaniteR castings that have been stress relieved. The heavily-ribbed bed casting has vibration-dampening characteristics, very important for machine rigidity and accuracy.

• DynaPath Delta 2000 T PC Based CNC Control with Standard Features
• 12 inch Color LCD with Interpolated Graphics
• 3.5" Floppy Disk Drive for Part Program Storage
• Hard Disk Drive for Downloading Large Files
• Menu Driven Conversational & EIA "G" Code Programming
• Interactive Conversational Programming Graphics
• Auxiliary Operators Panel

• Reference and Overtravel Limit Switches
• Automatic Lubrication System
• Precision Ground Ballscrews
• AC Brushless Servo Axis Motors
• Flood Coolant with Operation Controlled by M Function
• Fully Enclosed Splash Guard
• Removable Chip Pan
• Work Light
• Hardened and Ground Slideways
• Dual Electronic Handwheels
• Joystick for Jogging Axis

• 3 Jaw Chuck (Strong Brand)
• Geared Head with Programmable Spindle Speeds
• Constant Surface Speed

• Tailstock with Center
• T-slotted Compound for Optional Tool Post
• Tool Kit
• Leveling Pads
• Operation Manual

• 3-Jaw Power Chuck
• 4-Jaw Independent Chuck
• Pneumatic Collet Chuck
• Manual Collet Closer
• Larger Spindle Bore
• Larger Spindle Motor

• Manual 4 way Tool Post
• Quick Change Tool Post
• Rear Tool Post
• Electronic 4 Way Tool Post
• Auto 8 Position Turret
• Tool Holders / Center Sleeves

• Chip Conveyor
• Chip Bucket
• Hydraulic Tailstock (On Some Models)

• Steady Rest
• Follow Rest
• Face Plate
• High Pressure Wash
• Longer Distance Between Centers
• Transformers
• CE Mark

• Buffered Input
• Part Program Expansion to 448k
• Part Program Expansion to 896k RAM
• RS-422 Serial Port in Place of RS-232 Port
• Customer Prepared Cycles (User Macros)
• Probing/Includes Servo Transducer Card (4204303)

• 3-Jaw Power Chuck
• 4-Jaw Independent Chuck
• Pneumatic Collet Chuck
• Manual Collet Closer
• Larger Spindle Bore
• Larger Spindle Motor

• Manual 4 way Tool Post
• Quick Change Tool Post
• Rear Tool Post
• Electronic 4 Way Tool Post
• Auto 8 Position Turret
• Tool Holders / Center Sleeves

• Chip Conveyor
• Chip Bucket
• Hydraulic Tailstock (On Some Models)

• Steady Rest
• Follow Rest
• Face Plate
• High Pressure Wash
• Longer Distance Between Centers
• Transformers
• CE Mark

• Buffered Input
• Part Program Expansion to 448k
• Part Program Expansion to 896k RAM
• RS-422 Serial Port in Place of RS-232 Port
• Customer Prepared Cycles (User Macros)
• Probing/Includes Servo Transducer Card (4204303)

• When manual drilling, quill can be set to zero for depth measurement
• Hydraulic quill can be equipped to automatically forward and reverse

• When manual drilling, quill can be set to zero for depth measurement
• Hydraulic quill can be equipped to automatically forward and reverse