Home
About DynaPath
Products
Delta Series CNC Controls
CNC Machines
Tool Room Series Mills
Tool Room Series Lathes
Support
Parts
Training
Where to buy/map
International
Inquiry
sales@dynapath.com
service@dynapath.com
parts@dynapath.com
|
Tool Room Series LATHES
FB-15 |
|
 |
|
Features: |
- Full
power at low spindle speed
- Large diameter
precision ball screws
and nut assemblies on X
and Z axis-with metal
covers
- T-slotted
compound for easy mounting
of optional tool posts
- May
be used as a conventional
(manual ) lathe utilizing
dual handwheels or as a full
feature two axis CNC
- Centralized
automatic slideway
lubrication system
- Coolant
system
- Easy
chip removal through a front
access chip pan on wheels
- Full
sheet metal enclosure to
keep coolant and chips off
the floor
- 15"
is the swing over the bed
- Distance
between centers is 39.3" or 59"
- Spindle
speed - 50~4,500 rpm
- 10
HP main spindle motor
|
| |
| Specifications |
|
FEATURE |
FB-15 |
|
Swing Over Bed |
15" |
|
Swing Over Cross
Slide |
6.7" |
|
Distance Between
Centers |
39.3" / 59" |
|
Width of Bed |
12" |
|
Spindle Nose,
Internal Taper |
A2-6 |
|
Spindle Bore |
2.125" |
|
Spindle Speed:Gear
Steps/Range |
50~4500 RPM |
|
Longitudinal Travel
(Z-axis) |
29.5" / 49.2" |
|
Cross Slide Travel
(X-axis) |
7" |
|
AC Servomotor
(X-axis) |
48 in-lbs. / 0.9kW |
|
AC Servomotor
(Z-axis) |
48 in-lbs. / 0.9kW |
|
Dia. of Ball Screw
(X-axis) |
Ø1" P5 |
|
Dia. of Ball Screw
(Z-axis) |
Ø1.5" P10 |
|
Rapid Traverse Speed
(X-axis) |
195 IPM (5 M/min) |
|
Rapid Traverse Speed
(Z-axis) |
393 IPM (10 M/min) |
|
Boring Bar Diameter |
Ø0.787" |
|
Quill Diameter |
Ø2.125" |
|
Quill Travel |
5.1" |
|
Taper of Center |
MT.No.4 |
|
Main Spindle |
10 HP (7.5kW) |
|
Hydraulic Oil Pump |
OPT. 2 HP (1.5 kW) |
|
Forced Lubrication
for Headstock |
1/4 HP (190 W) |
|
Coolant Pump |
1/8 HP (95 W) |
|
Hydraulic Tank |
OPT. 5.3 gallons (20
liters) |
|
Coolant Tank |
23.5 gallons (89 liters) |
|
Weight (Net)
Approx. |
4,410 lbs / 4,850 lbs |
| Weight (Gross) Approx. |
4,850 lbs / 5,400 lbs |
| Machine Dimensions
(LengthxDepthxHeight) |
Length 90"/110" x
Depth 53" x
Height 87.8" |
|
- Actual working stroke
may be reduced by work
holding equipment and chuck
guards.
- Specifications are subject
to change without prior
notice.
|
|
TOP |
|
MORE |
|
